Modular FrameGrabber (MGB)
Grabovací technika
The Best-Seller among Frame Grabbers on European Automotive Industry market
Popis produktu
Popis produktu
The MGB FrameGrabber is an electronic device developed for video stream grabbing from Volkswagen Group infotainments (ABT, FPK, etc.). MGB captures a video stream and transfers it as a TCP stream via Gigabit Ethernet to PC for further processing and analysis. It has also implemented capability to save screenshots and to record video on internal memory card.
The MGB is connected directly to the video interface between an infotainment central unit (ZR) and an infotainment LCD display. The device is capable of transfering captured video stream in various compressed or non-compressed formats via TCP stream. H.264, Motion JPEG lossy compressions and loss-less raw video format are supported. Screenshots are stored with loss-less compression in PNG format.
The MGB supports also Area of Interest (Rectangle cutout in video). The selected Area of Interest is streamed separately via TCP stream and benefits in gaining of higher framerate and reduced baud rate.
The MGB is connected directly to the video interface between an infotainment central unit (ZR) and an infotainment LCD display. The device is capable of transfering captured video stream in various compressed or non-compressed formats via TCP stream. H.264, Motion JPEG lossy compressions and loss-less raw video format are supported. Screenshots are stored with loss-less compression in PNG format.
The MGB supports also Area of Interest (Rectangle cutout in video). The selected Area of Interest is streamed separately via TCP stream and benefits in gaining of higher framerate and reduced baud rate.
Klíčové vlastnosti
- Video stream grabbing from VW Group infotainments (ABT, FPK, ID. Display, etc.)
- Supported all LVDS systems used within the VW Group
- Configuration via web interface and/or TCP control socket API
- Video stream in various formats (without compression or H.264 and Motion JPEG compression)
- Snapshotting screenshots in PNG format
- Various triggers (GPIO, CAN, etc.)
- Gigabit Ethernet
- LVDS backchannel support
Dostupná rozhraní
- LVDS GMSL 2/3
- LVDS FPD Link 3
- LVDS FPD Link 2
- FPK Entry
- FPK Medium
- FPK Basic
- MIB3 EI
Available interfaces are capable of grabbing all LVDS systems used within the VW Group. Input video signal parameters (resolution, signal level, etc.) are detected automatically, thus the user does not need to set them manually.
Nadpis H2
Podrobné vlastnosti
A configuration of MGB parameters is done via user-friendly web interface. The user can configure various parameters, such as network settings, type of interface (GMSL 2/3, LVDS 2/3, etc.), type of video codec (H.264, Motion JPEG, RAW, etc.), properties of Area of Interest, screenshotting period, etc.
The MGB has implemented a trigger functionality. Trigger events of several sources are supported: two external GPIO inputs, a CAN bus event or the trigger button on MGB chassis. The trigger event can be set via web interface to control one of the following functionalities: MGB startup, screenshotting or video recording.
The TCP video stream supports optional visible binary timestamp embedded into video frames. Timestamp contains relative or absolute time. Time base of MGB is synchronized with NTP server. Timestamps are enabled and configured via web interface.
The MGB supports also a TCP control socket. TCP control socket is intended mainly for integration into test-automation framework. It allows run-time change of MGB parameters during performing of automated tests. TCP control socket stands as an advance alternative to user-friendly MGB configuration via web interface.
The MGB software can be easily updated by the customer. Firmware upgrade can be performed via internal memory card or via Ethernet and internal Samba network drive.
Příslušenství
GMSL 2/3 modul
Nadpis H2
- GMSL 2/3 module introduced in early 2020 is intended for grabbing from a new GMSL 3 LVDS bus
- Module is connected directly on LVDS bus between infotainment main unit (ZR) and infotainment LCD display
- For interconnection LVDS cables for GMSL 2/3 are used
FPD Link 3 modul
Nadpis H2
- FPD Link 3 module is intended for grabbing from FPD Link 3 LVDS bus
- FPD Link 3 LVDS bus is nowadays used in the majority VW Group infotainments with separated central unit (ZR) and LCD display
- For interconnection LVDS cables for FPD Link 2/3 are used
FPD Link 2 modul
Nadpis H2
- FPD Link 2 module is intended for grabbing from FPD Link 2 LVDS bus
- FPD Link 2 LVDS bus is older generation of FPD Link LVDS bus used within VW Group infotainments with separated central unit (ZR) and LCD display
- For interconnection LVDS cables for FPD Link 2/3 are used
FPK Entry adaptér
Nadpis H2
- FPK Entry adaptor is intended exclusively for grabbing from FPK Entry instrument cluster
- FPK Entry adaptor must be used together with FPD Link 3 module
- LVDS cables for FPD Link 2/3 are used for interconnection between FPK Entry adaptor and FPD Link 3 module
FPK Medium set
Nadpis H2
- FPK Medium set is intended exclusively for grabbing from FPK Medium instrument cluster
- FPK Medium set consists of two parts – FPK Medium module and FPK Medium Adaptor
- FPK Medium module is inserted directly to MGB
- FPK Medium adaptor is connected to FPK Medium instrument cluster
- FPK Medium module and FPK Medium adaptor are connected by flex cable – part of delivery
FPK Basic set
Nadpis H2
- FPK Basic set is intended exclusively for grabbing from FPK Basic instrument cluster
- FPK Basic set provides galvanic isolation between MGB and FPK Basic instrument cluster
- FPK Basic set consists of two parts – FPK Basic module and FPK Basic Adaptor
- FPK Basic module is inserted directly to MGB
- FPK Basic adaptor is connected to FPK Basic instrument cluster
- FPK Basic module and FPK Basic adaptor are connected by flex cable – part of delivery
MIB3 EI adaptér
Nadpis H2
- MIB3 EI adaptor is intended exclusively for grabbing from MIB3 EI (Einstieg) instrument cluster
- MIB3 EI adaptor must be used together with FPD Link 3 module
- LVDS cables for FPD Link 2/3 are used for interconnection between MIB3 EI adaptor and FPD Link 3 module
MGB zálohovací modul
Nadpis H2
- MGB backup module is intended for application when MGB is installed in the car and powered by car battery
- Provides backup functionality to cover voltage drops and pulses during engine starts
- Allows to keep MGB operating during engine starts
- Prevents MGB restarts caused by voltage drop-offs
- Super-caps powered
- MGB backup module is intended for installation into MGB device
LVDS kabely
Nadpis H2
Digiteq Automotive offers several types of cable:
- FPD Link 2/3 LVDS cable (1m) – straight connectors on both sides
- FPD Link 2/3 LVDS cable (1m) – straight connector on one side, 90 degree angle connector on other side
- GMSL 2/3 LVDS cable (1m) – straight connectors on both sides
Technické paramentry
| Podporovaná rozhraní | FPD Link 2/3, GMSL 2/3 |
| Formát videa | H264, MJPEG, RAW |
| Formát snímku obrazovky | PNG |
| Konektory | CAN, UART, 2x GPIO Trigger Input |
| Síť | Gigabit Ethernet |
| Napájení | 9 V – 30 V |
| Provozní teplota | 0° C – 70° C |
| Rozměry (Š x H x V) | 170 x 170 x 60 mm |
| Váha | 1300 g |
Na vyžádání nabízíme individuální školení a odborné konzultace k tomuto produktu. Pro více informací nás prosím kontaktujte.
Stažení dokumentů.
Stažení dokumentů je umožněno pouze registrovaným uživatelům. Máte-li svůj účet pak je nutné se přihlásit.
Napište nám — Ozveme se Vám!
Kontaktní formulář
2020 © Digiteq Automotive s.r.o. Používání těchto webových stránek souhlasíte s použitím souborů cookies.
Tvorba webu Freely Agency & H1.cz
Tvorba webu Freely Agency & H1.cz