Skip to main content
  • Home
  • Services
  • Products
  • Innovations
  • About us
  • 20 years
  • Career
  • Contact
  • CZ
  • EN
  • DE
arrow-up-thick
  • Home
  • Products
  • MEB Test Bench
meb1
meb2
meb3

MEB Test Bench

Test benches
The MEB Test Bench represents a model of a car electronics where all units can be seated and work the same as usual in cars.

Product Description

This light version of test bench is mainly intended for supporting the development and testing of ICAS3 projects.

The advantage of this solution is that tests can be run without the need for an actual car. The MEB Test Bench is made of a lightweight aluminium construction. The structure holds a wired harness fixed in a wire duct, which is intended for the connection of ECUs to evaluate technologies and accessories.

Switches are located on the front panel of the test bench. The power supply and data terminals are accessible from the right side. The speakers are on both sides. This configuration provides potential extensibility to the test bench. We offer various accessories for this test bench.

The MEB Test Bench can be made in an online (connected to the backend) or an offline version. It is also possible to extend the test bench using an RTL Enabler, which allows the user to remotely operate it from any location using a web browser.

Thanks to the flexibility of the mechanical design and a suitably designed wiring harness, the test state can be easily modified and extended. Custom modifications are also possible.

Key Features

  • Light and mobile test centre
  • Online version registered to the backend
  • Offline version
  • Construction flexibility
  • Possibility of extension with optional accessories (from a mechanical point of view)
  • Possibility to connect other units and accessories (from a wiring point of view)
  • CAN bus terminal
  • ETH terminal
  • Prepared for RTL Enabler
  • Prepared for CANSim4 Simulator
  • Prepared for MGB FrameGrabber
  • Prepared for PDC Box
  • Prepared for TraceBox
   

 

 

Readiness to Conection

  • In Car Application Server (ICAS1)
  • In Car Application Server (ICAS3)
  • Integrated control panel (ABT) 
  • Innovative Info Display (i.ID)
  • Sensor-actuator module (SAM) 
  • Multi-function steering wheel (MFL) 
  • Start / Stop button 
  • USB-C HUB 
  • Electronic steering column lock (ELV)
  • Kessy with antennas
  • Door control module (TSG), locks
  • LINDa (roof module) 
  • Air conditioning (AC)
  • Online connectivity unit (OCU4) 
  • Speaker for OCU
  • Transceiver box (Transc. Box) 
  • LTE antenna amplifier
  • Koppelbox
  • 4x loudspeakers (2 speakers included)
  • On board diagnostic (OBD II)
  • Rear view camera (RVC eCompact/eSmart)
  • Top view camera eEntry (TVC)
  • Cameras for top view eEntry
  • Augmented-Reality-Head-Up-Display (AR-HUD)
  • Smart Light
  • Sound (AMP)
  • Park Distance Control (PDC / PLA)
   

 

 

Accessories

Power supply Switching power supply 0-16 V / 20 A
CANSim4 Simulation of clamp states, speed, RPM, etc.
MGB FrameGrabber Video capture of i.ID, ABT, etc. 
RTL Enabler Extends test bench to remotely operate it using a web browser
PDC Box Compact, lightweight, aluminium box for PDC unit and sensors
TraceBox Modular solution for tracing and data logging
MSG cable harness Cable harness for connection of the motor control unit
RVC / TVC cable harness Cable hanress for connection of RVC / TVC
PDC / PLA cable harness Cable harness for connection of PDC / PLA
Sound box or cable harness for AMP According to customer requirements
ABT holder Aluminium panel for retrofitting
MFL holder Holder for multifunction steering wheel on table (not intended for fixed mounting on the test bench)
LINDa holder Holder for retrofitting the LINDa module
USB-C HUB holder Holder for retrofitting the USB-C HUB
Antenna cables Specific lengths
Antenna holders Panel for retrofitting on the test bench
Other accessories Available upon demand

 

Technical Paramaters

Supported platform MEB
Main purpose Development and validation of ICAS3
Connections CAN, LIN, Ethernet, UART (RS232), OBD II
Power supply 12 V to 15 V
Operating temperature For use in laboratory conditions only
Dimensions (W x D x H) 400 x 350 x 350 mm (including connectors, control elements, and DIN rail parts)
Weight without accessories 8.75 kg

 

Documentation

On request, we offer individual training and professional consultation with this product. For more information, please contact us.
Product Sheet 373.71 KB, pdf Download

Stažení dokumentů.

Stažení dokumentů je umožněno pouze registrovaným uživatelům. Máte-li svůj účet pak je nutné se přihlásit.

Register
Log in

Leave us message — we will contact you!

Contact form

*
*
*
*
*
*
  • Services
  • Mobility of the future
  • Development at software and system level
  • Testing
  • Products
  • Video Capture
  • Simulators
  • Test stands
  • Test Suitcases
  • Company
  • About us
  • Innovations
  • Career
  • Contact
instagram
facebook
linkedin2
youtube
2022 © By using this website you agree to the use of cookies.
Designed and developed by Freely Agency & H1.cz
  • Personal Data Protection
  • Compliance
  • Terms and conditions