Skip to main content
  • Hauptmenü
  • Dienstleistungen
  • Produkte
  • Innovationen
  • Über uns
  • 20 Jahre
  • Karriere
  • Kontakte
  • CZ
  • EN
  • DE
arrow-up-thick
  • Home
  • Produkte
  • Produkte
  • MQB Testwürfel
mqb1
mqb2
mqb3

MQB Testwürfel

Teststände
The MQB Test Bench represents a model of a car electronics where all units can be seated and work as usual in cars.

Produktbeschreibung

This test bench is mainly intended for supporting the development and testing of MIB3 projects.

The advantage of this solution is that tests can be run without the need for an actual car. The MQB Test Bench is made of a lightweight aluminium construction. The structure holds a wired harness fixed in a wire duct, which is intended for the connection of ECUs to evaluate technologies and accessories.

The front side of the test bench provides a place for the installation of ABT, SMLS, KI / FPK, and other hardware. Additional units can be installed on the sides of the test bench, where data buses and sockets are also located. The power and data terminals are located on the back side. This provides extensibility to the test bench. We offer various accessories for this test bench.

Thanks to the flexibility of the mechanical design and a suitably designed wiring harness, the test state can be easily modified and extended. Custom modifications are also possible.

The MQB Test Bench can be made in an online (connected to the backend) or an offline version. It is also possible to extend the test bench using an RTL Enabler that allows the user to remotely operate it from any location using a web browser.

Hauptmerkmale

  • Light and mobile test centre
  • Online version registered to the backend
  • Offline version
  • Optional connection for headphones
  • Construction flexibility
  • Possibility of extension with optional accessories (from a mechanical point of view)
  • Possibility to connect other units and accessories (from a wiring point of view)
  • CAN bus terminal
  • Prepared for RTL Enabler
  • Prepared for CANSim4 Simulator
  • Prepared for MGB FrameGrabber
  • Prepared for PDC Box
  • Prepared for TraceBox
   

 

 

Bereit zum Anschluß

  • Modular Infotainment Matrix (MIB3)
  • Gateway (GW)
  • Integrated control panel (ABT)
  • Instrument Cluster (IC/FPK)
  • Body Control Module (BCM)
  • Multi-function steering wheel (MFL)
  • Steering column switch module (SMLS)
  • USB-A HUB
  • Read coil
  • Kessy including antennas
  • Door control module (TSG), Locks
  • 3 - Tasten Modul (3TM)
  • Air Conditioning (AC)
  • MiKo bar (PDC/PLA/FPA buttons)
  • Online Connectivity Unit (OCU3)
  • Speaker for OCU
  • Rotary light switch (LDS)
  • Microphone (MIC)
  • 4x Loudspeaker (2 speakers included)
  • On Board Diagnostic (OBD II)
  • Rear View Camera (RVC Low/Compact/Compact+)
  • Area View (AV) – without cameras
  • Head-Up-Display (HUD)
  • Sound (AMP)
  • 3.5 mm jack connector
  • Park Distance Control (PDC/PLA)
   

 

 

Zubehör

Power supply Switching power supply 0-16 V / 20 A
CANSim4 Simulation of clamps state, speed, RPM etc.
MGB FrameGrabber Video capture of IC / FPK, ABT etc.
RTL Enabler Extender for possibility to operate test bench remotely using web browser
PDC Box Compact, lightweight, aluminium box for PDC unit and sensors
TraceBox Modular solution for tracing
MSG cable harness Cable harness for connection of motor control unit
RVC / AV cable harness Cable harness for connection of RVC / AV
PDC / PLA cable harness Cable harness for connection of PDC / PLA
Sound box or cable hanress for AMP According to customer requirements
ABT holder Aluminium panel for retrofitting
IC / FPK holder Retrofit kit
SMLS holder Aluminium steering wheel module holder (SMLS)
LDS holder Aluminium rotary light switch holder (LDS)
MFL holder Holder for multi-function steering wheel to the table (not for fixed mounting to the test bench)
3TM holder Bracket for retrofitting the 3TM module
MIC holder Aluminium holder for retrofitting the microphone
MiKo bar (MiKo toolbar) holder Holder for retrofitting MiKo rails (PDC/PLA/FPA buttons)
Antennas cables Specific lengths
Atennas holders Panel for retroffiting on the test bench
Original parts and components Units, controls, switches, antennas, speakers etc.
Other accessories Available upon demand

 

Technische Daten

Unterstützte Plattformen MQB
Hauptverwendung Entwicklung und Validierung MIB3
Stecker CAN, LIN, Ethernet, UART (RS232), OBD II
Stromversorgung 12 V – 15 V
Betriebstemperatur Benutzung nur unter Laborbedingungen
Abmessungen (B x T x H) 444 x 590 x 415 mm (einschließlich Stecker, Bedienelemente und Bauteile auf der DIN Leiste)
Gewicht ohne Zubehör 13,8 kg

 

Dokumentation

Auf Anfrage bieten wir Ihnen eine individuelle Schulung und profesionelle Beratung zu diesem Produkt an. Für weitere Informationen kontaktieren Sie uns.
Produktblatt 371.52 KB, pdf Download

Stažení dokumentů.

Stažení dokumentů je umožněno pouze registrovaným uživatelům. Máte-li svůj účet pak je nutné se přihlásit.

Registrovat
Einloggen

Kontaktieren Sie uns - wir melden uns bei Ihnen!

Kontaktformular

*
*
*
*
*
*
  • Dienstleistungen
  • Zukunftsmobilität
  • Entwicklung auf Software- und Systemebene
  • Testen
  • Produkte
  • Grabbing-Technik
  • Simulatoren
  • Teststände
  • Testkoffer
  • Firma
  • Über uns
  • Innovationen
  • Karriere
  • Kontakte
instagram
facebook
linkedin2
youtube
2022 2019 © Digiteq Automotive s.r.o. Durch das Nutzen dieser Webseiten geben Sie Ihr Einverständnis damit, dass Cookie-Dateien verwendet werden.
Webseitenkreierung Freely Agency & H1.cz
  • Schutz personenbezogener Daten
  • Compliance
  • Geschäftsbedingungen