Skip to main content
  • Hauptmenü
  • Dienstleistungen
  • Produkte
  • Innovationen
  • Über uns
  • 20 Jahre
  • Karriere
  • Kontakte
  • CZ
  • EN
  • DE
arrow-up-thick
  • Home
  • Produkte
  • Produkte
  • MEB Testwürfel Nano
mebnano1
mebnano2
mebnano3

MEB Testwürfel Nano

Teststände
The MEB Test Bench Nano represents a model of car electronics where all units can be seated and work the same as usual in cars.

Produktbeschreibung

This is a low-cost solution of traditional test bench and it is mainly intended for supporting the development and testing of ICAS3 projects.

The advantage of this solution is that tests can be run without the need for an actual car. The MEB Test Bench Nano is made of a light plastic base with DIN rail for KL. terminals, CAN bus terminals, fuses, and wire ducts for wires.

The MEB Test Bench Nano can be made in an online (connected to the backend) or an offline version. Thanks to the flexibility of the mechanical design and a suitably designed wiring harness, the nano test bench can be easily modified and extended. Custom modifications are also possible.

Hauptmerkmale

  • Designed and developed to minimize price
  • Light and mobile test centre
  • Test bench functionality in a small design
  • Online version registered to the backend
  • Offline version
  • Construction flexibility
  • Possibility of extension with optional accessories (from a mechanical point of view)
  • Possibility to connect other units and accessories (from a wiring point of view)
  • I/O CAN bus connectors
  • I/O ETH connectors
  • Prepared for CANSim4
  • Prepared for MGB FrameGrabber
  • Prepared for TraceBox

Bereit zum Anschluß

  • In Car Application Server (ICAS1)
  • In Car Application Server (ICAS3)
  • Integrated control panel (ABT) 
  • Innovative Info Display (i.ID)
  • Sensor-actuator module (SAM) 
  • Multi-function steering wheel (MFL) 
  • USB-C HUB 
  • LINDa (roof module) 
  • Air conditioning (AC)
  • Online connectivity unit (OCU4) 
  • Speaker for OCU
  • Transceiver box (Transc. Box) 
  • LTE antenna amplifier
  • Koppelbox
  • 4x loudspeakers
  • Direct access button (DIETa)
  • Lights and vision control panel (LiSi)
  • On board diagnostic (OBD II)
  • Rear view camera (RVC eCompact/eSmart)
  • Top view camera eEntry (TVC)
  • Cameras for top view eEntry
  • Augmented-Reality-Head-Up-Display (AR-HUD)
  • Smart Light
  • Sound (AMP)
  • Park Distance Control (PDC / PLA)
   

 

 

Zubehör

Power supply Switching power supply 0-16 V / 20 A
CANSim4 Simulation of clamp states, speed, RPM, etc.
MGB FrameGrabber Video capture of i.ID, ABT, etc.
TraceBox Modular solution for tracing and data logging
Other accessories Available upon demand

 

Dokumentation

Auf Anfrage bieten wir Ihnen eine individuelle Schulung und profesionelle Beratung zu diesem Produkt an. Für weitere Informationen kontaktieren Sie uns.
Produktblatt 394.48 KB, pdf Download

Stažení dokumentů.

Stažení dokumentů je umožněno pouze registrovaným uživatelům. Máte-li svůj účet pak je nutné se přihlásit.

Registrovat
Einloggen

Kontaktieren Sie uns - wir melden uns bei Ihnen!

Kontaktformular

*
*
*
*
*
*
  • Dienstleistungen
  • Zukunftsmobilität
  • Entwicklung auf Software- und Systemebene
  • Testen
  • Produkte
  • Grabbing-Technik
  • Simulatoren
  • Teststände
  • Testkoffer
  • Firma
  • Über uns
  • Innovationen
  • Karriere
  • Kontakte
instagram
facebook
linkedin2
youtube
2022 2019 © Digiteq Automotive s.r.o. Durch das Nutzen dieser Webseiten geben Sie Ihr Einverständnis damit, dass Cookie-Dateien verwendet werden.
Webseitenkreierung Freely Agency & H1.cz
  • Schutz personenbezogener Daten
  • Compliance
  • Geschäftsbedingungen