CANSim4
Simulatoren
CANSim4 is a successor of CANSim3, a widely used rest-bus CAN simulator, which simulates the features of the entire car for the tested unit
Produktbeschreibung
Produktbeschreibung
CANSim4 is capable of simulating several different units of the VW concern at the same time. It has been developed according to the needs of our main customer – Škoda Auto a.s. The primary purpose of the device is to stimulate Radios (MIB / ICAS3 units), but nowadays it can be used for other units and purposes as well. The most common use of CANSim4 is in the testing area, but it can be also used in miscellaneous demonstrators.
The main advantages of the CANSim4 are its small size, simple operation, comprehensive functionality and affordable price.
CANSim4 allows you to control basic simulation signals with manual control elements, which eliminates the need for a computer use. Those signal are for example speed, dimming level, or position of the switch box. Current 4th generation supports platforms MQB, MQB37W and electrical MEB.
The main advantages of the CANSim4 are its small size, simple operation, comprehensive functionality and affordable price.
CANSim4 allows you to control basic simulation signals with manual control elements, which eliminates the need for a computer use. Those signal are for example speed, dimming level, or position of the switch box. Current 4th generation supports platforms MQB, MQB37W and electrical MEB.
Simulierte Signale
The simulated signals are set in default version as it is described below. User is able to change function of potentiometers and switches as they are user programmable.
Simulierte Signale (Potentiometer)
- Speed (0 – 240 km/h)
- RPM (0 – 8000 rpm)
- Backlight (0 – 100 %)
- Steering wheel angle (± 800°)
- CNG, Water temperature, Clutch
- Outside temperature, Accelerator
- Open/close bonnet
Simulierte Signale (Schalter)
- KL.S / KL.15
- Sleep
- Backlight (Day and Night mode)
- PDC & Reverse
Hauptmerkmale
- 4x CAN interfaces (2 are CAN FD compatible)
- 2x LIN interfaces
- 2x HS switches (e.g. KL.15 and KL.S simulation)
- 1x LS switch
- BAP simulation
- RTC
- User programmable 6x potentiometers and 4x switches
- User defined rest-bus simulation
- 12x configurational DIP switches
- LED indication of CAN and LIN communication for all ports
- Network management NM high
- Up to 16 different modes
- Mini USB interface for firmware update and remote control
- Possibility of customized firmware modification
- Remote control over API
- CANSim Studio (own application for configuration of matrix .dbc)
Provozní módy
- 10 operating modes covering most applications
- Modes for MQB, MQB37W and MEB platforms
- Special modes for Infotainment test benches
- Special mode for demonstration purposes
- Special mode for MEB test bench (IgnSwExtV1 module is required)
- Mode which generates PWM-Signal “No Crash” (covering frequency of 10 Hz and 100 Hz)
Nadpis H2
CANSim Studio
CANSim Studio is a desktop application which supports CANSim4 device. It allows to create user-defined simulations from .dbc matrix.
Signals can be set to static values or to dynamic and assigned to CANSim4 control elements.
CANSim Studio also allows updating firmware automatically from the actualization server.
Zubehör
Kabelbaum 1:1
Nadpis H2
Cable harness which connects all contacts from the main CANON 15 connector (female) with the same connector (male)
Kabelbaum Octopus
Nadpis H2
Cable hanress with all CANs from the main connector CANON 15 (female) which are divided into separate connectors CANON 9 (male)
Kabelbaum Full Octopus
Nadpis H2
Cable harness with all CANs, power supply (KL.30, KL.31), LIN buses and PWM output from the main connector CANON 15 (female) which are divided and connected to separate connectors CANON 9 (male) and banana connectors
IgnSwExtV1 modul
Nadpis H2
Additional equipment for MQB37W and MEB Tets Benches which ensures correct function of KL.15 (and KL.S for the former one) pin
Kabel USB 2.0 mini
Nadpis H2
Mini USB cable for connection between CANSim and computer (e.g. for FW upgrade)
Externe Stromversorgung
Nadpis H2
- Power adapter for power supply
- Cable with banana connectors (on request) can be used for 12 V supply (for example from laboratory supply)
Technische Daten
| Unterstützte Plattformen | MQB, MQB37W, MEB |
| Materielle CAN-Schicht | gemäß ISO 11898 |
| Eingebaute CAN-Terminatoren | 120 Ω, geschaltet DIP-Schalter auf der Rückseite |
| Maximale Belastung von den Kl.15 und Kl S | 700 mA |
| Stromversorgung | 8 V - 18 V |
| Betriebstemperatur | -20 °C - 70 °C bei der Verhinderung von Kondensation |
| Abmessungen (B x T x H) | 72 x 148 x 35 mm (einschließlich Anschlüsse und Bedienelemente) |
| Gewicht | 220 g |
Das Gerät erfüllt die Anforderungen der Norm VW80000 (2017-10) für den Funktionsstand A (alle Parameter OK) im Betriebsmodus II.c (maximal zulässige Belastung).
Auf Anfrage bieten wir Ihnen eine individuelle Schulung und profesionelle Beratung zu diesem Produkt an. Für weitere Informationen kontaktieren Sie uns.
Dokumentace
Dokumentace
Na vyžádání nabízíme individuální školení a odborné konzultace k tomuto produktu. Pro více informací nás prosím kontaktujte.
Produktový list
Download
Stažení dokumentů.
Stažení dokumentů je umožněno pouze registrovaným uživatelům. Máte-li svůj účet pak je nutné se přihlásit.
Kontaktieren Sie uns - wir melden uns bei Ihnen!
Kontaktformular
2021 2019 © Digiteq Automotive s.r.o. Durch das Nutzen dieser Webseiten geben Sie Ihr Einverständnis damit, dass Cookie-Dateien verwendet werden.
Webseitenkreierung Freely Agency & H1.cz
Webseitenkreierung Freely Agency & H1.cz